BOPP Gum Tape Slitting Machine | Automatic Slitter Rewinder

Product Description

Automatic BOPP Gum Tape Slitting Machine (Slitting & Rewinding Line)

New Release: Automatic BOPP Gum Tape Slitting Machine

Built for tape converters and carton plants that buy jumbo rolls and sell finished logs, this slitting and rewinding machine turns a [1300 mm] BOPP mother roll into clean, evenly wound [48 mm] tapes at up to [300] m/min — with ±[0.5] mm width accuracy and a PLC that stores a recipe for every SKU you run. One operator, one screen, repeatable roll quality from the first log to the thousandth.

7 Product Highlights

Precision slitting at ±[0.5] mm — individual blade holders keep the cutting line straight, so every log matches the same width, batch after batch.

Servo constant-tension rewinding holds tension from core to full roll — firm, flat logs with no soft ends and no telescoping.

Speeds up to [300] m/min with auto length counting and auto stop; SKU change-over is a recipe call on the HMI, not a shift's work.

Shaftless hydraulic loading up to [Ø800 mm] × [1300 mm] wide — wide mother rolls from any coating supplier run without adapters.

PLC + HMI with a recipe library — operator training takes half a day, and the machine repeats the same roll every time.

Precision slit, edge trim and controlled tension cut trim loss and end waste — the saving shows up in your monthly film consumption.

Add a 3rd/4th rewind shaft, auto labelling, static elimination or dust removal — or run the slitter in line with your coating machine.

Application Scenarios

  • Tape converting & coating plants — jumbo roll in, finished 12–100 mm logs out, 24/7 production

  • Carton & corrugated box factories — self-supply sealing tape in 48/72 mm, cut your tape purchase cost

  • Packaging distributors & trading companies — private-label logs, multi-SKU small batches

  • E-commerce & 3PL warehouses — branded, logo-printed tape slitted to your packing-line width

  • Printing & converting houses — clear, colored, printed and low-noise BOPP tape on one machine

  • Food, beverage, appliance and export packing lines — consistent tape quality for automatic carton sealers

Product Advantages

 Dimension

 Advantage

 Cost

Buy jumbo, sell logs: lower cost per roll plus higher mother-roll utilization.

Quality

Tight width tolerance and flat roll faces cut complaints and returns.

 Efficiency

High speed, auto stop and recipe change-over improve both output and uptime.

 Labor

One operator; auto length, auto stop and optional auto shaft change.

Flexibility

Covers 12–100 mm widths and all common BOPP variants.

Reliability

Servo + PLC from mainstream brands with globally available spares.

Service

Material trial run before shipment, plus installation guidance, training and remote support.

Main Parameter

No.

Item

Spec

1

Mother roll width

500–1600mm

2

Mother roll diameter

800 mm

3

Finished width

12–100 mm

4

Mechanical speed

30–300 m/min

5

Slitting accuracy

+ -0.5 mm

6

Control

PLC + HMI

7

Power

12 kW,380V / 50Hz

8

Machine size / weight

3800*900*1980mm / 2500kg

Machine Introduction

Automatic BOPP Gum Tape Slitting Machine

Overview This BOPP gum tape slitting machine converts wide BOPP/OPP jumbo rolls into finished adhesive tape logs of 12–100 mm width, with length and weight controlled to your specification. It is the core equipment of a tape converting line: mother roll in, market-ready rolls out, one operator per shift.

How it works The shaftless hydraulic unwind stand loads the jumbo roll; a dancer/load-cell tension loop feeds film into the slitting station, where individual razor blade holders cut the web into exact widths. Edge trim removes the coated edges, and the servo-driven rewind shafts wind the slit tapes onto paper cores under constant tension. A length counter stops each shaft automatically at the set meterage, and the PLC logs width, length, tension and speed as a reusable recipe.

Key assemblies

  • Shaftless hydraulic unwinder with web-guide and edge-position control

  • Precision slitting head with individually adjustable blade holders

  • Servo (or differential) rewind shafts, [2] standard / [3–4] optional

  • Closed-loop tension control and static elimination

  • PLC + touch-screen HMI with SKU recipe library, alarm diagnostics and production counters

Quality you can measure Width tolerance ±[0.5] mm; roll face flatness and firmness held from core to full roll; no soft ends, no telescoping; slit edge free of burrs that cause tape breakage in automatic carton sealers.

Options 3rd/4th rewind shaft, auto labelling, dust removal, static bar, in-line connection with a coating machine, CE-configured electrical package for EU markets.

FAQ

  1. What is a BOPP gum tape slitting machine and how does it work? A machine that cuts wide BOPP jumbo rolls into finished 12–100 mm tape logs, using a shaftless unwinder, razor slitting head and constant-tension rewind shafts under PLC control.

  2. How does a tape slitting machine turn a jumbo roll into 48 mm finished rolls? The web is guided and slit by individually adjustable blades spaced to 48 mm; edge trim removes coated edges, and rewind shafts wind the slit tapes on cores until the length counter stops them.

  3. What is the difference between tape slitting and tape rewinding? Slitting divides the web across its width into multiple narrower tapes; rewinding only re-winds the same width onto a new core. A slitter rewinder does both in one pass.

  4. How do I choose the right BOPP tape slitting machine for my factory? Match three numbers first: mother roll width and diameter, target finished width range, and required m/min. Then confirm rewind shaft count, tension type (servo vs torque) and options.

  5. What slitting width and mother roll diameter should I specify? Specify slightly wider than your widest mother roll (e.g. 1300 mm covers 1280 mm rolls) and a rewind range covering your smallest SKU, typically 12–100 mm.

  6. How much does a BOPP tape slitting machine cost? Price depends on width, speed, shaft count and control brand. Request a quote with your mother roll size and target output for an exact figure.

  7. What is the hourly output of a tape slitting machine? Output = speed × slit tape count. At [300] m/min with [N] shafts of 48 mm, the machine produces [X] logs/hour — calculate with your own finished length.

  8. How do I calculate tape yield and waste rate in slitting? Yield = finished area ÷ mother roll area. Track edge trim width, end waste per shaft and change-over scrap; precision slitting typically keeps waste in the low single digits.

  9. Razor slitting or score slitting — which is better for BOPP tape? Razor (shear) slitting suits thin BOPP film with coated edges and gives the cleanest cut; score slitting is used where dust and blade wear matter more.

  10. Why do my finished tape rolls have wavy edges or telescoping? Usually unstable tension, misaligned blades or worn cores. Closed-loop tension, individual blade holders and core alignment eliminate it.

  11. How can I reduce noise when slitting BOPP tape? Use low-noise tape grades, keep blades sharp, add an enclosure or acoustic panel, and avoid over-speed on thin gauges.

  12. Can one machine handle printed, clear and low-noise BOPP tape? Yes — printed and clear BOPP slit the same way; only tension, speed and edge trim settings change, saved as separate recipes.

  13. What maintenance does a tape slitter rewinder need? Daily: blade check and core alignment. Weekly: tension calibration and cleaning. Monthly: lubrication and shaft inspection. Keep spare blades on site.

  14. What is the lead time, and do you provide installation and training? Typical lead time [X] days after deposit; we provide material trial video, installation guidance, on-site or remote training and English manuals.

  15. Is a servo-driven tape slitting machine better than a torque-motor one? Servo holds tension constant across the full roll diameter, giving flatter, firmer logs and less waste on thin film — the difference is clearest on high-speed, multi-SKU production.

Contact Us:

Email: nancy@northpackdg.com

WhatsApp: +86 156 3178 0840

Contact Us

North Pack Lead Edge Thin Blade Slitter Creasing Scoring With Stacker Machine

FY Corrugated Cardboard Sitting Scoring Machine/Thin Blade Machine

BFY Thin Blade Slitting Scoring Machine

BFYThin Blade Slitting and Creasing Machine

BFYThin Blade Slitting and Creasing Machine