Views: 3 Author: Site Editor Publish Time: 2021-11-01 Origin: Site
Brief Introduction Of Chain Feeding Printing Machine For Carton Box Make
The chain feeder printing slotting machine adopts the printing method of manually placing paper and using the push board fixed on the chain to enter the printing group. Some machines add a slotted part in the printing unit to form the printing slotted part at one time, while others add a rotary die-cutting unit. Such a process saves a lot of time, and the profit increases accordingly.
This model uses more resin printing plates. If it is multi-color printing, each printing unit needs to separate the machine to paste the printing plate, and then combine the machine to check the printing position. It is a little troublesome and takes a long time to adjust the machine. The skill requirements for operators are still very high.
The paperboard is fed horizontally, and most of them are relatively long. There are generally three to four push paperboards fixed on the chain. If the push paperboard is not in a straight line, the manual paper feeding method is adopted, so the disadvantage is also obvious: the paperboard feeding is easy to skew.
What are the consequences of skew feeding paper?
The position of the printed content is easy to move, and the key is that it is bad when it comes to the slotting group. The left and right notches are different, which directly leads to poor forming of the carton and skew of the carton height.
Although the disadvantages of the printing machine with chain paper feeding are obvious, this machine is cheap, simple and easy to operate. Even inexperienced staff can easily master it, and the failure rate of the machine in use is also very low. It is very suitable for new factories or factories with high capital pressure.